11 ESD Testers and Measurement
Zero Charge ESD Testers & Meters
Wrist strap, Heel Strap Measuring Systems, Resistance Checkers and Field meters
Check our products How and Where to Order

You May Also Need:

Germany France Spain Italy Netherlands Poland Lithuania Romania Russia Egypt Czech
Zero Charge™ ESD Tester & Measurement     Inquiries: e-mail ESDmeters@ESDmeters.com                   
A-STAT-Check A-STAT-Check
Static Electricity Locator and Meter
Indispensable tool to "see" static charge and protect yourself to prevent Static Electricity Damage. Also to verify effectives of applied counter-measures against Static Electricity. Small, handy, pocket size and supplied with soft, protective etui. Small cost and great benefits.
ACM2_Mok.jpg Single Wire Wrist Strap Constant Ground Monitors
and Periodic Verifications Units
A-400             flaga-belgii-ruchomy-obrazek-0010.gif   flaga-francji-ruchomy-obrazek-0028.gif en français
Universal Surface Resistivity and Resistance Checker
Surface resistivity, surface to ground and point to point resistance indicator
Three functions of A-400 Universal Resistance Checker
  1. Surface resistivity check
  2. Surface to ground resistance check
  3. Point to point resistance check.
A-RVP1A-401 Set _M

A-401 Set
ESD Compliance Checker Set for ESD safe carts and chairs

Includes:

  • A-400 meter
  • A-SRP five pound probe
  • Five A-RVP1 stainless steel plates
  • Four AVW-6BC-Bk zero ohm wires
  • Instruction Manual
A-402.png

A-402 Set
Universal Resistance Checker with two resistance probes

It can be used to measure surface resistance, surface-to-ground resistance, and point-to-point resistance of a variety of objects. For example, it can be used to measure clothing, mats, tabletops, floors, etc.

Includes:

  • A-400 meter
  • Two A-SRP five pound probes
  • Two AVW-6BC-Bk zero ohm wires
  • Instruction Manual
Standard Resistivity Tester RT-1000             flaga-belgii-ruchomy-obrazek-0010.gif  flaga-francji-ruchomy-obrazek-0028.gif en français
Standard Resistivity Tester Humidity, Temperature, Resistivity
RT-1000 tests resisitivity, humidity and temperature of all conductive, antistatic and static dissipative surfaces for electrical resistivity/resistance according to the EOS/ESD CECC, ANSI, ASTM, UL, NFPA, Military, and EIA test procedures.
Combination Data Logger Tester CT-8900
Combination Data Logger Tester
CT8900-BC-E-3MD Complete Three Station Test System with: Self powered RS232 cables, Door Locks, Bar Code Badge readers, and 6 port serial card.
ASFF-9_4ok_m.jpg ASFF-9             flaga-belgii-ruchomy-obrazek-0010.gif flaga-francji-ruchomy-obrazek-0028.gifen français
Free Standing, One Touch Wrist Strap and Dual Footwear Tester
This system was created to provide a dependable, low cost and easy-to-use tester for
personnel grounding devices. ASFF-9-A Tester complies with U.S. standards: 750kohms
to 10-Mohms range for wrist straps and 750kohms to 100Mohms range for footwear.
ASFF-9-E Tester complies with European standards: 750-kohms to 35-Mohms range for
both wrist straps and footwear.
ASFF-9DLS Thumbnail.png

ASFF-9DLS-A Kit
ESD Safety Personnel Entry Control System with a Magnetic Lock Kit (Free-standing)
This system combines the ASFF-9 testing system with a magnetic lock kit to form an entry control system. The lock, which is rated for up to 600 lb (280 kg), will open only if the tested personnel pass an ESD grounding check. The system includes a wall-mounted exit button. A power supply, mounting equipment, and connecting cables are also included.

ASFF-9DLWL-A Thumbnail.png

ASFF-9DLWL-A-Kit
ESD Safety Personnel Entry Control System with a Magnetic Lock Kit (Free-standing)
This system combines the ASFF-9 testing system with a magnetic lock kit to form an entry control system. The lock, which is rated for up to 600 lb (280 kg), will open only if the tested personnel pass an ESD grounding check. A wireless transmitter allows for easy placement of the test station. Safety features include a wall-mounted exit button and a keychain emergency bypass. A power supply, mounting equipment, and connecting cables are included.

AWFF-9
Wall mounted, One Touch Wrist Strap and Dual Footwear Tester
This system provides a dependable, low cost and easy-to-use way to test personnel
grounding devices. ASFF-9-A Tester complies with U.S. standards: 750kohms to 10-Mohms
range for wrist straps and 750kohms to 100Mohms range for footwear.
ASFF-9-E Tester complies with European standards:  750-kohms to 35-Mohms range for
both wrist straps and footwear.
AWFF-9DLS Thumbnail2.png

AWFF-9DLS-A Kit
ESD Safety Personnel Entry Control System with a Magnetic Lock Kit (Wall-mounted)
This system combines the AWFF-9 testing system with a magnetic lock kit to form an entry control system. The lock, which is rated for up to 600 lb (280 kg), will open only if the tested personnel pass an ESD grounding check. The system includes a wall-mounted exit button. A power supply, mounting equipment, and connecting cables are also included.

AWFF-9DLWL-A Kit.png

AWFF-9DLWL-A Kit
ESD Safety Personnel Entry Control System with a Magnetic Lock Kit and a wireless transmitter (Wall-mounted)
This system combines the AWFF-9 testing system with a magnetic lock kit to form an entry control system. The lock, which is rated for up to 600 lb (280 kg), will open only if the tested personnel pass an ESD grounding check. A wireless transmitter allows for easy placement of the test station. Safety features include a wall-mounted exit button and a keychain emergency bypass. A power supply, mounting equipment, and connecting cables are included.

AWM-8 NEW 2_M.jpg AWM-8
Wall mounted wrist strap and footwear test station 
The System offers a low cost alternative to assure property protected personal in ESD safe
areas.
It is available as AWM-8A Tester for U.S. standards (Ranges: 750kohms to 10-Mohms for
wrist straps and 750kohms to 100Mohms for footwear).
AWM-8E Tester for European standards ( Ranges:  750-kohms to 35-Mohms for both wrist
straps and footwear).
AWM-8 NEW 2_M.jpg AWM-8DL 
Wall Mounted Wrist Strap and Footwear Tester with an AC switch for external Door
Lock 
The System offers a low cost alternative to assure property protected personal in ESD safe
areas.
It is available as AWM-8DL-A Tester for U.S. standards (Ranges: 750kohms to 10-Mohms
for wrist straps and 750kohms to 100Mohms for footwear).
AWM-8DL-E Tester for European standards (Ranges: 750-kohms to 35-Mohms for both
wrist straps and footwear).

   AWM-8ADL_M.jpg AWM-8DLW-A Kit
Wrist strap and footwear test station with a magnetic door lock to allow for door opening only if the 
personnel tested OK for correctness of ESD protective devices worn by him/her before entry to an 
ESD protected area. Supplied with a complete hardware kit for easy installation without requiring a 
licensed electrician.
Just mount the hardware and plug into a standard AC outlet. 

Best value. Reliable, worry free, digital, microprocessor controlled.
    AWM-8DLWL-KIT-A_M.jpg

AWM-8DLWL-KIT-A       flaga-belgii-ruchomy-obrazek-0010.gif flaga-francji-ruchomy-obrazek-0028.gifen français
Wrist strap and footwear test station with the magnetic door lock to allow for door
opening only if the personnel tested OK for correctness off ESD protective devices 
worn by him/her before the entry to an ESD protected area. Supplied with a complete 
hardware kit for easy installation without a need for a licensed electrician. 

Wireless Model with a transmitter build into the ESD meter to make possible an easy 
relocation of the test station if needed.

Easy installation. Just mount the hardware and plug into a standard AC outlet.

        

AR-8 Wrist and Heel Strap Tester AR-9
Wrist strap and dual independent footwear tester. This tester works best with
ZeroCharge dual footplate P/N:
A-FP2

Model ASFF-9-A Tester complies with U.S. standards:750kohms to 10-Mohms range for
wrist straps and 750kohms to 100Mohms range for footwear.
Model ASFF-9-E Tester complies with European standards: 750-kohms to 35-Mohms range for
both wrist straps and footwear.
AR-8 Wrist and Heel Strap Tester AR-8                        flaga-belgii-ruchomy-obrazek-0010.gif flaga-francji-ruchomy-obrazek-0028.gifen français
Wrist Strap and Footwear Tester. This tester works best with ZeroCharge footplate
P/N:
A- FP1

It is available as AR-8A Tester for U.S. standards (Ranges: 750kohms to 10-Mohms for wrist
straps and 750kohms to 100Mohms for footwear). 
AR-8E Tester for European standards (Ranges: 750-kohms to 35-Mohms for both wrist
straps and footwear).

AR-7 Wrist Strap Tester AR-7
Wrist Strap Tester
A compact unit for testing wrist bands. The unit is easy to operate. There are three LEDs, to
display the test result and the unit produces an audible signal. It indicates if a wrist band or
cord meets the range of the required resistance.
ACAL-9
Calibration Checker 
for AR-9 Wrist strap and dual footwear tester. It provides the users of AR-9, ASFF-9 and
AWFF-9 testers with a vehicle to test periodically at their own facility the accuracy of
calibration without the need of sending the testers  to a manufacturer or a Distributor for
a periodic calibration check.
AR-CAL.CHECK AR-CAL.CHECK           flaga-belgii-ruchomy-obrazek-0010.gifflaga-francji-ruchomy-obrazek-0028.gifen français
Calibration Checker for AR-7 and AR-8 Wrist Strap and Footwear Testers
AR-CAL.CHECK is an addition to our microprocessor controlled line of Wrist Strap and
Footwear testers. It provides the users of AR-7 or AR-8 testers with a vehicle to periodically
test at their own facility the accuracy of calibration without the need of sending the testers to
a manufacturer or a distributor for a periodic calibration check.
STATEST FLOOR.jpg

ANTISTATIC FLOOR INSPECTION SYSTEM 

Approve a complete Workstation in less than 30 seconds!
The STATIC FLOOR TESTER is designed for fast, standard conformant (IEC 61340-5-1 / ANSI/ESD S20.20)
testing of conductive floor coverings, table mat's, chairs and trolleys.                               

STATEST VISUALIZER.jpg

STATIC VISUALIZER

Analyze electrostatic processes!
The Static Visualizer is a 12-bit A/D converter with special software for the simple analysis of electrostatic processes.
All field strength meters and charged plate monitors with an analog output can be connected to it.

                                                     

TREK 541-A.jpg

TREK MODEL 541A 
NON-CONTACTING ELECTROSTATIC VOLTMETER