11 AWM-8 - Wall mounted wrist strap and footwear test station
Zero Charge ESD Testers & Meters
Wrist strap, Heel Strap Measuring Systems, Resistance Checkers and Field meters
Check our products How and Where to Order

You May Also Need:

Zero Chargeā„¢ AWM-8 - Wall mounted wrist strap
and footwear test station
Features
  • Two in one instrument to check both wrist straps and footwear.
  • Extremely easy to use. Just move your finger from wrist strap button to footwear button to complete the test (without a need to remember to change a position of an additional switch from one measurement to the other like with other manufacturers units).
  • Built using SMT technology for reliability.
  • Microprocessor controlled for accuracy.
  • Dependable and simple.
  • Pass tone is easy to hear.
  • Visual indicators to show pass, low or high fail and low battery condition.

The wrist strap and footwear tester system was created to fill a growing demand for a dependable, low cost and easy-to-use test mechanism for personnel grounding devices. It is available as AWM-8A Tester, (U.S. standards) a 750-kohms to 10-Mohms range for wrist straps and 750kohms to 100Mohms range for footwear and AWM-8E Tester (European standards) a 750-kohms to 35-Mohms range for both wrist straps and footwear.

System includes
  • AR-8 Wrist and Footwear Tester with 9V battery
  • AWM-WP - Wall mounted plate with test instructions
  • AWM- FP - Foot plate
  • A-FM9-0 - Zero ohms grounding wire
  • Manual
A-WM8 - Wall mounted wrist strap and footwear test station
Note: Wrist Strap not included with the System
AR-8 Wrist and Footwear Tester with 9V battery
AR-8 Wrist and Footwear Tester with 9V battery
Technical specifications
AR-8A (U.S.A. Parameters) AR-8E (European Parameters)
For both wrist straps and foot wear
Wrist Straps Foot wear
Pass Level 750 kohm-10 Mohm;
green light and audible tone
750 kohm-100 Mohm;
green light and audible tone
750 kohm-35 Mohm;
green light and audible tone
Low Fail < 750 kohm;
yellow light no tone
< 750 kohm;
yellow light no tone
< 750 kohm;
yellow light no tone
High Fail > 10 Mohm;
red light no tone
> 100 Mohm;
red light no tone
> 35 Mohm;
red light no tone